• mastod0n@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 hour ago

      I mean isn’t this wrong? It may be near 100% but there’s never 100% conversion to a single kind of energy. For example, even if it’s just a tiny faction, magnetic field convert electrical energy to kinetic energy, no?

  • Anna@lemmy.ml
    link
    fedilink
    English
    arrow-up
    6
    ·
    10 hours ago

    What about heat pumps they have efficiency in the range of 200-300%

    • stom@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      26 minutes ago

      Heat pumps move heat around, whereas radiators create it.

      The “efficiency” of heatpumps relates to heat they import into a system for a given amount of power, compared to creating heat with that power. They are not generating that heat. They are moving it.

      Similarly, it’s much more energy efficient to use a wheelbarrow to collect ice and move it inside, than it is to make ice cubes in freezer.

  • JATth@lemmy.world
    link
    fedilink
    English
    arrow-up
    12
    ·
    edit-2
    12 hours ago

    Power-line losses before your house, so a electric heater is only 96%-85% effecient. When the heating for bird feets is accounted, it’s 100%.

    • Noved@lemmy.ca
      link
      fedilink
      English
      arrow-up
      30
      ·
      19 hours ago

      Which travels to a location, hits it and is eventually converted to heat.

        • psud@aussie.zone
          link
          fedilink
          English
          arrow-up
          2
          ·
          15 hours ago

          Typically a heater is in a room, so any light doesn’t need to go further than the nearby walls

          • nexguy@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            12 hours ago

            But a heater produces heat and light. The light might turn into heat later but that’s not heat from the heater. Otherwise everything is s heater and it’s all part of the same heater… the universe.

    • piccolo@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      8
      ·
      19 hours ago

      When light is absorbed by surface, the material temperature increases and remits light at a longer wave, ussually in the IR spectrum. So its safe to say all light is heat enegry.

      • Zerush@lemmy.ml
        link
        fedilink
        English
        arrow-up
        3
        ·
        5 hours ago

        Setup sponsored by Cyberpunk 2077: Ultimate Edition, to have a real toasting effect.

    • sp3ctr4l@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      11
      ·
      edit-2
      22 hours ago

      A completely valid pannini press, imo.

      Like this is literally the ‘modern problems require modern solutions’ meme.

      I’ve used older PC battlestations of mine as ‘bonus’ spaceheaters more than once, lol, sorta like those ‘pocket warmer’ apps for phones that would just run some absurd computation that would redline the cpu, hahah!

      • Sylvartas@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        6
        ·
        21 hours ago

        I have a little “tradition” of doing a playthrough of very hardware-demanding stuff in winter. Tarkov is one of my favs for this since it’s unoptimized as hell and the post soviet aesthetics really fit the season

        • sp3ctr4l@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          20 hours ago

          I may get flack for this but mine was the Cinematic Mod version of HL2.

          Not because I wanted … the terrible ‘cinematic’ music, or ludicrous XXX character model ‘upgrades’… I genuienly liked the revamped maps, greater texture detail.

      • NιƙƙιDιɱҽʂ@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        20 hours ago

        I had some frozen imitation crab legs that I wanted to eat, but didn’t want to microwave proper. I put them on top of my PC’s GPU radiator and ran a stress test while watching stuff so it would thaw faster without overheating.

        • sp3ctr4l@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          19 hours ago

          Oh.

          Sorry, I’m… actually unfamiliar with concept.

          Is that basically a sausage with a small loaf of bread baked around it?

            • sp3ctr4l@lemmy.dbzer0.com
              link
              fedilink
              English
              arrow-up
              1
              ·
              13 hours ago

              Ah ok! I don’t speak Dutch, but it looks like a kind of … flakier, pastry style bread… honestly looks delicious!

              Closest thing I’ve personally had to that would probably be a piroshki/pirogi, or maybe a calzone, but those both use more… bready breads, if that makes any sense, lol.

      • sp3ctr4l@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        3
        ·
        edit-2
        19 hours ago

        … Some people keep track of their power bricks and know where they’ve been.

        … Never thought ‘good cable management’ would become a hygiene/sanitation issue, but, apparently it is.

  • cass27@lemmy.zip
    link
    fedilink
    English
    arrow-up
    31
    arrow-down
    1
    ·
    22 hours ago

    Noise would be a small but non-zero form of heat loss that shouldn’t contribute to temperature increase

    • dz2@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      23
      ·
      22 hours ago

      Noise would turn in to heat as it’s absorbed, so it’s just heat with extra steps. Same deal with lights

    • kkj@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      56
      ·
      1 day ago

      A brushless motor only converts ~5% of its input to heat. That’s low enough that you can reasonably call it a side effect.

      Now, a computer, that’s a heater that happens to produce math as a side effect. 100% of its input ends up as heat.

      • janAkali@lemmy.4d2.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        3 hours ago

        Main effect of a brushless motor is moving matter really fast, which, on a molecular level, is same as heating it.

      • lonefighter@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        9
        ·
        1 day ago

        I love firing up my PC and gaming on cold winter nights. A well placed fan or two and I can spread it through my entire apartment and the heat won’t kick on all night. Ends up saving me money, my heater costs way more than my PC to run.

            • merc@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              1
              ·
              18 hours ago

              By “well below” do you mean -30? Or do you mean -5? Either way, you must have much better insulation than I do, because I have multi-kilowatt heaters and even on not-so-cold days my poor PC can’t compete, no matter how hard I game.

              • lonefighter@sh.itjust.works
                link
                fedilink
                English
                arrow-up
                2
                ·
                16 hours ago

                Like anywhere from -15 to -4 C (around 5-25 F). I also keep it around 15 C (60 F) in my apartment to keep heating costs lower so it doesn’t need to get super warm to keep my thermostat from kicking on.

      • BradleyUffner@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        ·
        edit-2
        1 day ago

        It all becomes heat eventually in the end though. Sometimes it’s just a multi step complex process outside the physical bounds of the heater.

        Wait a sec, is the universe just God’s space heater?

        • merc@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          1
          ·
          18 hours ago

          Yes, what is that motor doing? If it’s a drill, it’s spinning a drill bit and that drill bit generates a lot of friction when it tries to make a hole in something, and that friction generates heat. If it’s spinning a tire, that tire generates a lot of friction with the road.

        • potpotato@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 day ago

          In god’s universe it is winter and that’s why the earth is heating up. It says so right in Ecclesiasties. Boom, toasted climate change nerds.

      • Tiger_Man_@szmer.info
        link
        fedilink
        English
        arrow-up
        1
        ·
        17 hours ago

        if you dont count powering i/o devices (other heaters) (or electromagnetic wave emmiters so heaters with extra steps)

    • SorryQuick@lemmy.ca
      link
      fedilink
      English
      arrow-up
      4
      ·
      21 hours ago

      Indeed we’ve plugged in a bitcoin miner to our central heating and now heating is “free”. I’m not sure how profitable it is when you’re not using the heat though.

  • AnarchoEngineer@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    268
    arrow-down
    1
    ·
    2 days ago

    Resistive heaters still suck though because Heat pumps give you 200-400% efficiency. So heating wise, “100%” still less than maximally efficient.

    (Not a violation of thermodynamics btw. Heat pumps use electricity to move heat energy that already exists, so the electric power in is often significantly smaller than the heat coming out of the device)

    • TheTechnician27@lemmy.world
      link
      fedilink
      English
      arrow-up
      68
      arrow-down
      1
      ·
      edit-2
      2 days ago

      Resistive heaters still suck though

      • Resistive heaters are much more portable and flexible. (edit: and quiet)
      • Resistive heaters are a viable backup when heat pumps fail in extremely cold weather.
      • Resistive heaters are less money upfront for if you only have to use them occasionally.

      One is not directly beneath the other. Both have their place.

      • AnarchoEngineer@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        22
        ·
        2 days ago

        Fair enough, do we need to extend this heater solidarity to combustibles as well?

        I mean technically they’re infinitely electrically efficient if you don’t use electricity to start them lol

    • SpongyAneurysm@feddit.org
      link
      fedilink
      English
      arrow-up
      15
      ·
      1 day ago

      Strictly speaking that’s not efficiency, but a coefficient of performance.

      And funny enough the work energy doesn’t even have to be electricity. It’s actually mechanical energy, that is required and you could even power a heat pump with a steam or diesel engine.

        • ryannathans@aussie.zone
          link
          fedilink
          English
          arrow-up
          7
          ·
          edit-2
          1 day ago

          No, but you can use some forms of “light” to heat things

          If you want confusing specifics, light has negative absolute temperature

          • captcha@lemmy.frozeninferno.xyz
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            1 day ago

            Yeah, that is a bit confusing, i never thought about light being an example of one of those systems. Edit: looks like this applies only to laser light because light has a temperature of an emitting body, and lazing body has negative temperature

            my short interpretation would be like this

            A system with negative thermodynamic temperature is hotter than any system with a positive temperature. If a negative-temperature system and a positive-temperature system come in contact, heat will flow from the negative- to the positive-temperature system.

            This situation occurs because temperature is not really a measure of speed of particles, but rather a measure of entropy, and for ordinary objects entropy can increase infinitely, increasing temperature too. For systems with capped amount of states entropy reduces when energy is added, and that is negative thermodynamic temperature.

            So negative temperature is more energetic than positive, and because of that it heats up positive temperature object when in contact.

            Light kinda does that, but I am not sure I can come up with an explanation of how to measure its temperature and if it fits the definition

  • sp3ctr4l@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    7
    ·
    edit-2
    22 hours ago

    Perhaps this is a dumb question, but perhaps it is not:

    If you just had, in say a studio apartment, or a single bedroom, basically just a large container of water, where the container is made of something fairly to considerably thermally conductive…

    Would or could this act as something like a thermal regulator for the room, to a potentially useful degree, such that it could ease the overall power usage of an AC/Heating system?

    The water doesn’t do anything, in like a designed machine sense; its not part of plumbing or heating, its just a big ole tank of water, sitting there.

    The idea I am going with is something like how large static bodies of water act as regulators for nearby climate zones, through a day night cycle … they tend to keep temperatures in the surrounding area a bit more stable, though of course humidity and the water cycle have other effects in a more open weather system.

    I also realize there are a lot of potentially confusing or confounding variables at play here.

    But my thinking is that maybe, at some scale, in some conditions, this could basically normalize your day-night temperature cycle, at least somewhat.

    Obviously in real world, just a simple tank of water would potentially freeze in winter, or boil in summer, in more extreme environments, that you’d at bare minimum have to have some mechanical system to prevent problems… but uh, … yeah.

    • Captain Aggravated@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      17 hours ago

      I’ve seen someone do something slightly like this with a greenhouse. It had a large tank of water in the middle. It was black, so it absorbed sunlight during the day, heating the water, and then that kept the temperature up at night.

      I think it also had something to do with an aquaponics setup? Like there were either fish in the tank, or in a “pond,” and fish shit water would be cycled out to the plants because fertilizer?

    • Pipster@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      10
      ·
      edit-2
      21 hours ago

      You see this with normal heating systems. My house has hot air heating with a big burner and vents in the rooms. It is great for instant heat but once it turns off you lose the heat just as fast. And if you dont have a vent in the room it can be pretty cold.

      But the house I grew up in had water filled radiators in every room. Took ages to warm up the house but it would transfer an awful lot of heat into the brick walls so it would stay warm for a really long time after the heating shut off.

      So in the old house in winter you really didnt notice the heating turning on and off but in my new one it is painfully obvious. I really want to rip it out and get a better system.

    • girsaysdoom@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      3
      ·
      17 hours ago

      So a bunch of the other comments have mentioned this but you would be creating a thermal battery essentially. These can be useful for smoothing out the temperature changes in that room but it isn’t exactly efficient since the only way to heat or cool it is by changing the temperature at the surface of the container.

      Adding passive heat sinks like radiator fins would increase the efficiency as it would absorb or diffuse the temperature difference with increased surface area but it would still would be subject to things like the air conditioning turning on and off more regularly when there is a higher ambient temperature delta or condensation when the weather is hot and moisture is high. You’ve essentially added an inactive water boiler tank in the middle of a room that takes up space and takes a long time to either heat up or cool down and it still would be lagging behind where you want the temperature to be.

      You’re on the right track to a good idea with trying to store thermal energy but it can be made better with a few tweaks:

      • Let’s make the tank part of an active system by adding pumps and a heat exchanger that integrates with your current air duct system (assuming you have one). We can heat and cool the tank directly instead of passively so that our time and energy is directed more efficiently.
      • Insulate it so that we minimize any unwanted heat changes
      • Move it to a utility room or outside so you aren’t taking up room space

      Now we have a thermal battery that works with your air conditioning system as opposed to against it. This can be paired with other methods of heat/cooling such as a solar system.

      But if you’re in a dorm or somewhere you can’t make changes, it could make sense if you aren’t paying for electricity, you actively heat/cool the bucket by putting it in a freezer or on a heater/fire, and you don’t mind a large metal container in the middle of the room? Just watch for a lot of condensation when cooling the air.

    • Dippy@beehaw.org
      link
      fedilink
      English
      arrow-up
      5
      ·
      edit-2
      22 hours ago

      Yes, this is called thermal mass, or more scientificly, heat retention. The more stuff you in have a space, the more resilient to change it’ll temperature it is. Insulation, is basically putting a bunch of high retention materials in perimeter of a building so that it stays more consistent

    • billwashere@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      22 hours ago

      I don’t think it’s a dumb question at all. I’m not a physics person but I think what you’re describing is a thermal battery. It’s the reason people put tiles in their ovens for smoothing out hot and cold spots and moderating temperature swings from the oven cutting on and off or opening the door.

      • Omgpwnies@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        22 hours ago

        Large brick/stone fireplace+chimneys do similar in colder climates, holds heat in the winter and stays cooler in the summer.

        • BeMoreCareful@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          22 hours ago

          Oh, I hadn’t even thought of that. I always thought stoves were just way more efficient, but a giant old school hearth-thing actually makes a lot more sense now.

          • Captain Aggravated@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            2
            ·
            17 hours ago

            Something you’ll forever see now: In the United States, homes in the North have inboard chimneys and hearths. The brickwork is inside the walls for better heating in the winter. Homes in the South have outboard chimneys, so that you can cook in the summer without dying of heat stroke.

      • sp3ctr4l@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        2
        ·
        21 hours ago

        I didn’t downvote you, but:

        Ok, then… have a ceiling fan above it?

        A very slow one, that uses little energy?

        • YiddishMcSquidish@lemmy.today
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          20 hours ago

          Secondary thought! What if you attached a bunch of processor heat sink type fins to the mass? Might not be good for long term regulation, but it would smooth out temperature curves daily.

          • sp3ctr4l@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            3
            ·
            19 hours ago

            Yes but then the downside is you have a giant porcupine that will draw blood, in the middle of the room, lol.

            You could buff that out a bit though?

            …?

        • YiddishMcSquidish@lemmy.today
          link
          fedilink
          English
          arrow-up
          2
          ·
          20 hours ago

          No need to apologize for someone else. But I appreciate the thought.

          And you are absolutely right. A ceiling fan, plus a thermal mass would work.

      • kkj@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        2
        ·
        22 hours ago

        They can drop all the way to 0 if the temperature difference is high enough. You can’t heat your house with a heat pump if it’s 0K outside.

        • starman2112@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          21 hours ago

          Heat pumps generally come with an electrical resistive backup in case it’s too cold outside, so even at arbitrarily low temperatures a heat pump can only drop to 100%

          • kkj@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            3
            ·
            20 hours ago

            At that point, the heat pump is off and you’re using a resistive heater. You can’t just glue an LED to an incandescent lightbulb and call it a 50% efficient incandescent lightbulb.

            • starman2112@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              3
              ·
              19 hours ago

              True. You know, the moment I left that comment, I thought that was pedantic, I shouldn’t have said it, but by that point if I had deleted it it would just sit there saying deleted forever and that would bother me even more

              • kkj@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                2
                ·
                13 hours ago

                I usually issue retractions by just putting a strikethrough on the text of the comment (using double tildes [~~] on each side).

        • ultracritical@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          19 hours ago

          Heat pump could heat your house if it’s near 0K “outside”. Heat pumps are how we chill to near 0K anyways. And by heat pump I mean literally a window air conditioner. Replace the freon in your typical AC with helium and get a really fancy evaporator (cold head or cold finger is the trade term) and you could probably get a 10cc vial on the end to sub 70K. With vacuum and a bigger 240V window AC unit you can get near 4K. Running multiple heat pumps in stages and with liquid nitrogen as coolant for some of them and you can condense helium and push really close to 0K.

      • scratchee@feddit.uk
        link
        fedilink
        English
        arrow-up
        18
        ·
        1 day ago

        Mostly, but not entirely.

        Most thing you struggle to approach anywhere near 100% efficient, heating is a bit easier in that you can get a lot closer, but you’ll still hit limits before reaching 100%.

        Saying inefficiencies are lost as heat is really a lazy simplification, inefficiencies are lost as anything It just turns out that 95% of anything is heat, from entropies perspective.

      • zergtoshi@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 day ago

        If all became heat upon striking a surface that would make lighting anything pretty impossible and most would be dark.

    • ChickenLadyLovesLife@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 day ago

      My oil heater makes gurgling noises so that acoustic energy is lost. It would also just heat up the room eventually, but I usually have a window open in winter so a tiny bit is lost that way.

    • 9point6@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 day ago

      What about a combination heater/lamp where the lamp part is just incandescence