• henfredemars@infosec.pubEnglish
    38·
    8 months ago

    Are you running a proprietary video driver? It might be worthwhile to disable it in case it became incompatible perhaps after a kernel upgrade.

    Did you perform a graphical login prior?

      • henfredemars@infosec.pubEnglish
        14·
        8 months ago

        First, you might try booting an older kernel to see if that runs for you. Your bootloader such as grub might help you pick an old one.

        The older kernels are actually combinations of kernel + initial ramdisk that contains the version of your graphics drivers that were being used at that time. It could be a way to test the hypothesis.

          • henfredemars@infosec.pubEnglish
            12·
            8 months ago

            Hmm, interesting. That tells us that it’s not actually a problem with your graphics driver or kernel version, and given that it was working on this version before, I would think some aspect of Xorg configuration, your graphics hardware has an issue, or your installation in general has been corrupted when it tried to upgrade.

            You might try to detect corruption by using a tool like debsums to check for any obviously corrupted files.

            What’s the state of your debian packages I wonder… does something like apt-get update or apt-get check highlight any problems with the state of installed packages that could point to a failed upgrade?

            • mariah@feddit.rocksOP
              61·
              8 months ago

              I think its because / is full. Some packages cant update. Is there a way to combine them without gui as i am disabled and cant use a mouse? I know u cant edit partitions booted

              • Successful_Try543@feddit.de
                14·
                8 months ago

                If you can boot into terminal session, e.g. by pressing Ctrl + Alt + F2, you can try:

                sudo apt clean
sudo apt -f install
sudo apt clean
sudo apt dist-upgrade
sudo apt clean

                If sudo apt -f install doesn’t work properly, you can create an apt-cache folder on, e.g. your home partition, assuming this is the one with sufficient amounts of free storage.

                sudo apt clean
sudo mkdir /home/apt-cache
sudo nano /etc/fstab

                In the fstab you specify where this directory shall be mounted:

                /home/apt-cache    /var/cache/apt/archives    none    bind    0    0

                Now you copy the files in place and mount the partition:

                sudo cp -r /var/cache/apt/archives/* /home/apt-cache
sudo mount -a

                Nou you should be able to run the fix-installation and update commands without the errors:

                sudo apt -f install
sudo apt dist-upgrade
              • henfredemars@infosec.pubEnglish
                5·
                8 months ago

                This may seem like an obvious question, but are there files you can remove or perhaps move to another drive or USB stick temporarily to make enough space to get through your updates? You should be able to do those while rootfs is full.

                We can certainly delete or copy files using the terminal.

                Are you sure the root is full and not readonly due to other errors? Why do you believe root is full?

    • cevn@lemmy.world
      81·
      8 months ago

      Every time I have seen a funky black screen with text against my will Nvidia was involved.

  • Naz@sh.itjust.works
    232·
    8 months ago

    It’s good to see that the same problems from Knoppix in 1998 still persist into 2024.

    It’s become my standard procedure to do a full backup before a major version upgrade of Linux nowadays as a result

    Xserver has failed to start.

  • db2@lemmy.world
    239·
    8 months ago

    wtf.png

    Looks like it wants to remove the cause but not the symptom.

  • thevoidzero@lemmy.world
    5·
    8 months ago

    Did you solve it? Recently there was a problem with graphics thing and downgrading mess from 1.24 to 1.23 helped me. It was in arch with AMD graphics, but some people said Nvidia ones also had the problem.

    Edit: mesa not mess

  • BabyVi@lemmy.world
    4·
    8 months ago

    I would be looking for ways to revert that update. Either using a pre-existing timeshift shapshot or maybe apt’s built in reversion capability. (Which I’m not familiar with, sorry.) Hopefully someone with real skills will chime in, good luck.

  • PrettyFlyForAFatGuy@lemmy.ml
    4·
    8 months ago

    if your updates included a new kernel try installing the kernel headers for the new kernel.

    then if it’s still not working reinstall the nvidia driver.

    i used to daily drive debian with proprietary nvidia drivers and it would break with every kernel upgrade

    from memory, so almost certainly incorrect, the fix was simply something like

    
sudo apt install linux-headers-`uname -r` && sudo reboot