• circuitfarmer@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    85
    arrow-down
    1
    ·
    edit-2
    9 months ago

    After switching to laser, I truly don’t understand how inkjets still sell. Is it purely for photo printing at home? Because outside of that specific use case, laser is far superior on every axis.

    A toner cartridge lasts for years and years, even with limited use, and it nets you thousands of pages. Laser printers aren’t even that expensive anymore, and I’d argue they’re cheaper than inkjet after having to refill the latter just a single time.

    Edit: and something I didn’t know until I got one: toner doesn’t run if pages get wet. There have been a few times where that has been handy.

    • Poayjay@lemmy.world
      link
      fedilink
      English
      arrow-up
      22
      ·
      9 months ago

      My wife has a cricut. It’s a little CNC plotter table that can make custom stickers, signs, and whatnot with a very clean UI. They are pretty popular with the stay-at-home mom crowd. If you know a better way to high quality color prints on specialty papers I’d love to hear it. I know that sounds sarcastic, but I mean that with absolutely zero sarcasm. Please tell me.

      • towerful@programming.dev
        link
        fedilink
        English
        arrow-up
        19
        ·
        9 months ago

        That sounds like a legitimate use case, tbh.
        Sometimes the complexity of a “better” system isn’t worth it when a “lesser”-but-easier system exists that produces satisfactory results.

        I know PCB etching enthusiasts have developed a way to transfer laser toner onto copper PCBs.
        I wonder if there is a similar system that could be done, but between print paper and product paper.

        • SpaceNoodle@lemmy.world
          link
          fedilink
          English
          arrow-up
          9
          ·
          9 months ago

          The transfer is done because it’s really hard to feed a PCB into a printer.

          Color is the main concern.

          • towerful@programming.dev
            link
            fedilink
            English
            arrow-up
            2
            ·
            9 months ago

            Ah, right enough. I remember destroying a $20 inkjet so I could feed PCBs through it.
            I stopped prototyping my own PCBs before I got into UV transfer or toner transfer. Its been a good many years

            • SpaceNoodle@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              9 months ago

              One lab I was in used a CNC mill to route boards. It was pretty effective, and really great for custom geometry like encoders formed to the back of motors or boards doubling as structural components.

              • towerful@programming.dev
                link
                fedilink
                English
                arrow-up
                1
                ·
                edit-2
                9 months ago

                I bought a 3d printer with an eye to get back into PCB fab… Either by swapping to a CNC head, or by printing plastic onto PCB.
                I just don’t make enough PCBs these days to justify the FAFF of making it work. Which is a shame. I bet if have a lot of fun

    • Son_of_dad@lemmy.world
      link
      fedilink
      English
      arrow-up
      22
      arrow-down
      1
      ·
      9 months ago

      A color laser printer costs $400+ where I live. That’s why people still but inkjet, Cause you can buy those for $50.

      To poorer people, that’s always the grind. You know you’re gonna pay more in the long run, but you can’t afford the initial investment in order to make those savings

      • iamjackflack@lemm.ee
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        2
        ·
        edit-2
        9 months ago

        Laser printers are literally the same price most likely. In the us market (atleast) you can get them for $60 from Dell / etc. you don’t have to spend $200+ on a laser typically.

        Most people don’t need color. Monochrome lasers are dirt cheap.

        That is of course unless there’s some issue with availability wherever you are

        • Son_of_dad@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          9 months ago

          The cheapest Dell laser printer where I live is $200 and that’s a black and white, the color ones are $300 for the cheapest

      • Dhs92@programming.dev
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        Color laser printers basically need a full printer assembly for each color, which drives up the cost. I believe there’s LED laser printers that can do everything in a single assembly so they’re typically cheaper

      • MammyWhammy@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        When I was in college I just bought new printers on sale when I ran out of ink because it was cheaper than buying refills.

      • Confound4082@lemmy.ml
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        4
        ·
        9 months ago

        I bought my color laser printer from the local university surplus store for $20…

        • Son_of_dad@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          1
          ·
          9 months ago

          I can’t imagine anywhere I could buy a laser printer in my city for $20 unless it was from an old lady at a garage sale that is selling random shit. Can’t even buy a meal for $20 around here. University stores are also a place you go when you want to get gouged.

          • Confound4082@lemmy.ml
            link
            fedilink
            English
            arrow-up
            2
            ·
            9 months ago

            University surplus is where they sell any and all items no longer needed by the school.

            Though, I have also had some really good luck on govdeals for some stuff

            • Son_of_dad@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              9 months ago

              There’s no such store in my city. They just sell all the surplus on marketplace at crazy prices. Just saw a used laser printer on there for like $300

    • themoonisacheese@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      19
      ·
      9 months ago

      Because on a shelf with inkjet printers, lasers cost 5* the upfront cost. Of course you make that back by not buying 50€ cartridges everytime you print because the ink is dry, but consumers don’t think about the type of printer they’re buying.

    • wander1236@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      13
      ·
      9 months ago

      My dad prints a lot of schematics and diagrams on 11x17 to mark up and edit for his job, but color laserjets that can handle 11x17 don’t seem to exist outside of the humongous office printers with 5 1000-sheet paper drawers. Probably because the toner cartridges need to be bigger.

      He’s got a Brother ink tank inkjet, though, which is pretty much the next best thing.

    • 0110010001100010@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      1
      ·
      9 months ago

      Yeah I’ve been using laser printers for years, fuck inkjet. I’m still on the starter cartridges from my current one and it’s pushing 5 years old. Though I print very little. Unlike ink that dries out, toner is fine for a very long time.

    • Artyom@lemm.ee
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      2
      ·
      9 months ago

      I’m more confused by the fact that anyone owns a printer at home tbh.

  • henfredemars@infosec.pub
    link
    fedilink
    English
    arrow-up
    18
    ·
    9 months ago

    I’m sure they’ll think to include a small piece of paper that says something about mandatory binding arbitration and waiving all rights that can be legally waived, in the next version.

  • Aussiemandeus@aussie.zone
    link
    fedilink
    English
    arrow-up
    21
    arrow-down
    4
    ·
    9 months ago

    When my printer runs out of ink I buy a new printer.

    They make a loss on the printers and I rarely print

    • a1studmuffin@aussie.zone
      link
      fedilink
      English
      arrow-up
      26
      ·
      9 months ago

      Back when I was getting into electronics, I used to drive around during hard waste collections on the lookout for interesting devices to pull apart. (One man’s trash is another man’s treasure!)

      Honestly, it was shocking how many printers and scanners were being thrown out. Every second hard waste pile had one. These were devices that looked 3-4 years old at most.

      Clearly many people employ your strategy, and the companies are to blame. The volume of waste they’re incentivising with their business model is criminal. I hope HP get everything that’s coming to them.

      • DarkSirrush@lemmy.ca
        link
        fedilink
        English
        arrow-up
        9
        ·
        9 months ago

        I remember when I was a teenager, Walmart sold shitty printers that came with ink for $35… Replacement ink for that exact model was $20/cartridge.

      • Corkyskog@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        5
        ·
        9 months ago

        Colleges are a huge problem with this. They charge per page, it’s reasonable… but a lot of the Laptops used to come with coupons for near free printers. So basically all of them get chucked at the end of graduation or even each year.

      • melpomenesclevage@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        9 months ago

        If Greenpeace really cared every cannon and HP employee would be nailed to a cross lining the path to their headquarters.

  • graeghos_714@lemmy.world
    link
    fedilink
    English
    arrow-up
    14
    ·
    9 months ago

    I dropped HP printers when I tried to use a new ink cartridge and it was out of date and wouldn’t print. We have 2 Epson’s with refillable ink cartridges now.

  • AutoTL;DR@lemmings.worldB
    link
    fedilink
    English
    arrow-up
    8
    arrow-down
    1
    ·
    9 months ago

    This is the best summary I could come up with:


    HP “sought to take advantage of customers’ sunk costs,” printer owners claimed this week in a class action lawsuit against the hardware giant.

    Lawyers representing the aggrieved were responding [PDF] in an Illinois court to an earlier HP Inc motion to dismiss a January lawsuit.

    Among other things, the plaintiffs’ filing stated that the printer buyers “never entered into any contractual agreement to buy only HP-branded ink prior to receiving the firmware updates.”

    In the case, which began in January, the plaintiffs are arguing that HP issued a firmware update between late 2022 and early 2023 that they allege disabled their printers if they installed a replacement cartridge that was not HP-branded.

    It added that the printer owners can’t claim damages for being overcharged under federal antitrust laws because consumers who buy products from an intermediary can sue the manufacturer for injunctive relief under those laws, but they can’t sue the manufacturer to recover damages resulting from an alleged overcharge.

    HP CEO Enrique Lores has made no secret of the fact that it hopes to pull customers into a print subscription business model.


    The original article contains 449 words, the summary contains 182 words. Saved 59%. I’m a bot and I’m open source!

    • Banzai51@midwest.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      9 months ago

      Not legally binding. Companies can kick you off their services, but they can’t legally make you do anything IRL like agree to arbitration or only buy their ink, etc.

      • southsamurai@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        Worse, they make printing in black only without colors anywhere from impossible to infuriating, depending on how much you’re willing to put up with.

        And yeah, you get one use of a non brother cartridge, then it’s “empty” permanently.

    • LinkOpensChest.wav@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      2
      ·
      9 months ago

      Agreed. There’s no such thing as a good printer anymore. Fuck them.

      On the bright side, printers sucking so badly has led me to take extreme measures to avoid having to print much of anything, and on the rare occasion we need something printed, I just go to the library and do it there.