So I jumped ship from Windows to Kubuntu last night, and It’s mostly been pretty good. However my general performance of the computer has been abysmal. Like it takes upwards of 5 seconds to open anything. All of my hardware seems to be running at max speeds, so I have no idea why it would be so sluggish? It’s as if I’m running on 2gb of ram and a cpu at like 1.5ghz. My specs are:
i7-8700k at 4.7ghz max Amd Rx 6750xt 16gb ram at 3200mhz Linux is on an m.2
Any ideas? This is practically unusable for any normal operations, let alone any gaming.
Update: So it seems like my CPU is being throttled to it’s min of 800mhz because the temp is just below 100c. Not sure why it’s so high because I never got that high even in intensive gaming on Windows
You must log in or register to comment.
I would start by checking for any sort of errors in your system logs, such as
/var/log/syslogor usingdmesg -w. In my experience, Linux is almost universally faster than Windows.When I switched from Windows to Linux I found cockpit-project.org to be a true blessing when troubleshooting. Something about having logs and services in a Web GUI that can be really helpful.
f.e.: https://cockpit-project.org/images/screenshot/journal.webp
Yeah, there’s probably something wrong. This is good advice. Maybe some tool can also do a performance benchmark to find the culprit. I’ve seen a lot of Linux computers. And except for some strange hardware, it’s supposed to be (at least) as fast as anything else.
Except for GNOME cause the DE is essentially a browser engine and CSS themes :)
no, you are wrong about it being slower, and also about it being a browser
Yeah sure, keep working in your delusions.
GNOME Shell is tightly integrated with Mutter, a compositing window manager and Wayland compositor. It is based upon Clutter to provide visual effects and hardware acceleration.[20] According to GNOME Shell maintainer[21] Owen Taylor, it is set up as a Mutter plugin largely written in JavaScript[22] and uses GUI widgets provided by GTK+ version 3.
https://en.wikipedia.org/wiki/GNOME_Shell
And yes, GNOME is slower than Windows, KDE and Xfce. Always has been, always will be. It might be polished but it is slow.
where is written that gnome is a browser?, they only use javascript, like they could have used anything else, still don’t make it a browser, or like one
and yes it’s lighter than windows, proved by ubuntu being recomended for lightweight OS(even when they use extensions and Snap), and where i said that it’s lighter than KDE and Xfce for you to bring it up lol
By definition something that executes JS and parses CSS is a browser.
and yes it’s lighter than windows, proved by ubuntu being recomended for lightweight OS
Absolutely not. It gets recommended as a lightweight OS because 1) there are delusional people and 2) if you remove and stop everything on Windows 10 that you don’t it will be faster, way faster than anything running GNOME.
The problem isn’t the OS per si, the problem is the UI. GNOME is SLOW as hell and even if the OS behind it is way more efficient than Windows it will lose against a debloated Windows 10 setup because Window’s UI is fully native and way faster.
By definition something that executes JS and parses CSS is a browser.
This is wrong. A browser parse a html document and construct a DOM, executing JavaScript and CSS are optional. GTK apps don’t have DOM, GTK has ability to parse UI styles from css instead of from XML so styling can be separated from UI definitions. Modern UI toolkits like QT (used extensively by KDE) also have CSS supports.
I agree GNOME is resource heavy however that has nothing to do with Javascript being involved. The James Web Telescope uses Javascript for some of its core functionality (specifically managing its science modules), does that make it a web browser? I personally don’t like GNOME either, but most of it is written in C, it has its own GUI library which is written in C. The Javascript code likely just is used to simplify calling the underlying C functions and CSS is used for customizing the actual UI elements.
You know, it’s not that I don’t like it, but if it was faster things would be better. Even on a 10th-gen i7 with all the RAM launching an App on GNOME is always slower than KDE or Xfce. You feel a slight delay, maybe half a second or so.
To be honest their entire ecosystem is very used friendly and you’re kinda forced into GNOME as most GNOME apps will pull a ton of GNOME components with themselves even if you’re on KDE or others.
I guess excel is also “just a browser” since it can run JS too?
Excel is everything, runs on a Browser, can run a Browser and everything in between :D
Which distribution of Windows would you recommend for this debloated experience?
isn’t that basically what the windows ui is, too?
Absolutely not.
Windows 11’s shell is mostly WebView2.
And you say that because…?
…it’s true?
No it isn’t.
With temps that high in Linux and Windows, it almost sounds like the AIO water block is falling off the CPU.
or the pump has failed
Since you mentioned high cpu temps, do you have a water cooler? It’s possible that the pump is running at a reduced speed or not at all. If it was functioning fine on windows that leads me to believe that it’s not hardware related like some are suggesting.
I do have a AIO radiator. The pump itself is plugged into CHA_FAN1 and shows about 1600RPM, but I don’t remember the normal speeds
Are your AIO fans, pump, etc. connected to the motherboard or through a USB hub?
OP this comment could be a major clue to whats happening with your AIO.
I have some fans connected via hub, but the pump and aio fan are connexted directly to the motherboard
That would be where I’d look first. A lot of AIO manufacturers only write drivers for Windows. There’s an old Reddit thread that has a few things to try. If this is your first dip into Linux get used to googling things. A lot of things. Ubuntu or Kebuntu are great OS to start on because there is always a forum post or a Reddit thread that deals with exactly what you’re dealing with. Once you are more comfortable I’d move onto Linux Mint or straight Debian. All those nice things that make Ubuntu easy to learn will eventually also hold you back.
Do you know what model AiO you have? Some models report pump speeds as higher since they have multiple magnets triggering the RPM sensor, so the 1600 might actually be 800 or even 400, which is way too low for the pump.
I would try setting the pump (and AiO fan) to 100% speed in the Bios for testing. Some pumps work well with a fan curve, some don’t.
Edit with more technical details: Normally each revolution should generate 2 Pulses on the rpm Feedback wire. But Pumps don’t always follow this spec so might over or underreport their actual rpm.
If your AIO pump came with a hub you likely need to use it instead of plugging directly into the Mobo.
As an example my corsair AIO came with a hub and i didnt want to use it. Finished my build and found out i absolutely had to use it in order for the device to work properly.
Look up CoolerControl I use it for my Corsair AIO, and my CPU cooler runs entirely off a USB header. But CoolerControl also supports motherboard headers.
You can use it to make custom fan curves and check pump/fan speeds.
I’ve had similar problems in the past with an AIO, the pump should always be at 100%, so I usually do this through BIOS. My old Mobo had a dedicated pump pin, but the new one doesn’t, so I put it on a fan one and configured it to 100% all times. If the pump is not at maximum it might not move enough water for the system to cool.
The problem here might be a difference between how Windows and Linux handle fan control, CHA_FAN1 is a chassis fan, it might be that Kubuntu is not using the CPU temp for it, instead relying on another sensor.
Although to be honest I don’t think this might be causing your issue. I’m leaning more to thinking this is related to either the snaps or some problem with the disk you have Linux on. My recommendation is to test a live iso for different distros, if the live iso for Kubuntu works better than on the disk it might imply some issue with the disk, if it’s also slow it might be a problem with Kubuntu, I would recommend then testing different distros with KDE Plasma, they would look and feel the same but might be faster if the problem is Ubuntu’s snaps. I personally don’t like it but I’ve heard people speak highly of Fedora and OpenSuse.
Check your motherboards manual, there may be a water cooling pump specific header.
AIOs typically pretend to be a fan and you would only need to use that with a custom loop.
I’ve had a few issues with fan control on AMD hardware. In your motherboards BIOS, try taking all fan control off auto, and set it for full load. In your OS, download Radeon-Control (AMD GPU Fan control) and set it for full load. See if your Temps stay high. I think Kubuntu comes with Fan-GUI (I think that’s what it’s called). Disable it.
This sounds like a hardware problem. Keep in mind that thermal paste doesn’t last forever. I’d rebuild it.
I agree it sounds like your cooler is failing or not installed correctly.
But it’s weird that didn’t happen on the Windows gaming time… 🤔
Driver support or fan profile maybe?
Are you using snaps? Snaps are notorious for God awful performance.
Any Ubuntu affiliated distro is required to use snaps, so Kubuntu will use them. Startup times are terrible, but running performance should be the same.
Another simple distro to try would be either Mint or Pop-OS. Both are still Ubuntu based, but without snaps
Mint’s interface (Cinnamon) is similar to Windows, Pop-OS uses a modified GNome
Fedora KDE is also a great option. Bleeding edge but stable.
Based on your update, are the AMD drivers loaded and working? Maybe it’s using CPU for rendering instead of GPU.
Is there a way I can tell? I haven’t downloaded anything manually as my monitors seem to work out of the box unlike windows
I haven’t used Linux on desktop in ages but back in the.day we would do something like run gears to see if the animation was smooth and check the frame rate. Maybe use lsmod to check for the GPU’s kernel module.
Install “nvtop” to see all GPUs Performance graph. I do not remember if Intel was supported for Performance graph, but at least you can see a change for your AMD GPU.
There are AMD Top tools to see all data from AMD too.
I don’t think it would be throttled to 800Mhz if this was the case, though. It definitely sounds like their cpu cooler isn’t working right. Maybe due to a kernel bug somehow, or maybe it just coincidentally died right when they moved to Linux.
yeah cpu fan/cooler does sound more likely.
Do you use some weird cooling solutions? Drivers may be an issue. The other possibilities I can think of are hardware related.
You didn’t mention what kind of cpu cooler (that I see). Have you checked there is fan spin for cpu fan? Possibly in windows you’ve got software controlling fan speed and that link is missing in Linux so it’s trying to just passively cool it? Even more complicated to diagnose if it’s an aio but could be similar with no pump running.
What i would figure out first is why tf your hardware runs on max all the time.(Maybe a bugged out program?) You can do so via top/htop/btop etc.
Generally I would say the exact opposite is the norm. Every Linux flavor I have tried feels a lot faster than any of its peer windows versions
For me, Garuda Linux with Gnome or KDE felt very laggy. But this experience is old.
But a lot of distros do feel much smoother than Windows for me too.
Honestly it sounds like a slight hardware issue that was made worse by Linux not having hardware modules written by the manufacture
if your CPU is at 100%, running “top” will show you what’s taking CPU time
htop is another good option. And for OP if they aren’t familiar, it’s control-c to exit these little terminal apps.
My current favorite is
btop. Very nice TUI.Wow, that is nice.
I think pressing Q works too to exit htop.
I’m not sure about how much up to date Kubuntu’s drivers are but maybe, if the software is at fault, changing to a more bleeding edge distro, like Fedora KDE, would solve this issue with temperature.
Lubuntu or xubuntu are quicker (especially on lesser machines), but it does sound like you’ve got cooling issues.
I always find Kde heavy-handed with resources to deliver the GUI.
KDE wouldn’t be slow on the kind of hardware he’s using. I’ve used it on far lower end hardware with no noticeable slowdowns.
Yes, KDE requires hardware accelerated graphics and more memory to run smoothly, but anything built in the last 10y should have no issues meeting those requirements.
