- cross-posted to:
- opensource@programming.dev
- cross-posted to:
- opensource@programming.dev
I needed another corded mouse and this time around I thought of @PKL@mastodon.social and @pronk@mastodon.social instead of Logitech’s shareholders. These guys make open source mice among other open source hardware under the brand Ploopy. You can order one from them, assembled or as a kit, or you could print and build it entirely by yourself.
The mouse itself is pretty great. Coming from a long line of Logitech (MX518/G5/G500/G502), it’s a bit larger than what I’m used to but I think I’m getting accustomed to it.
Here’s another shot of it:
Is it comfortable in the hand? The surface looks super rough
All Ploopy’s stuff looks rough. I think they’re 3D-printing them. Maybe one day they’ll progress to something that gives a nicer result.
I was looking at their trackballs but the ambidextrous ones look awkwardly tiny and have rattly bearings, in addition to the rough finish. I support what they’re doing but I wish the products were a bit less prototypey.
The whole point is that it’s open source and they want people to be able to print them themselves.
Yes they are 3D printed
Poorly 3D printed.
The layering issue could be solved by orienting the object at a 45° angle
Or even smaller layer height. That looks like .2 or .24 minimum.
I could reprint the housing one day, when I get a printer myself. 😂
Yeah, definitely 3D printed.
It looks rough, but it’s actually fairly comfortable.The only bit that bothered me was the edge of one of the buttons, and a nail file fixed that in seconds.
Looks like a bitch to clean. Gonna get all sorts of grease collecting in those grooves…
Theoretically, you can mold it to fit your hand but the tolerances and mountings make that a hassle.
As for the print itself? Most people just do a quick print and have the telltale ridges from layers. But you can futz with settings to improve the smoothness or just finish the print itself. At which point it is not going to be as smooth as injection molding but it will be more “different” than “bad”.
Stupid question from someone who’s never 3d printed anything - can you just sand these things smoother?
It depends how it was printed.
As a SUPER simplified basic: Any 3d print consists of walls/perimeters and infill. The walls are the exterior surfaces of the print. The infill is what is inside. And the vast majority of prints tend to be sparse infills. So rather than solid plastic beneath those walls, you mostly just have air and a mesh structure of some form.
So if the wall is thick enough (generally referred to as “number of walls”)? Sure. If it isn’t? You’ll just see the void inside the shell itself and make things much worse.
What is generally done to reduce “3d printed texture” is a mixture of smaller print layers (so the ridges are much thinner), printing with more walls, and actually lightly melting the exterior surface (either through chemicals or heat).
VKB are probably the kings of the mid-range sicko HOTAS market and I am like 90% certain they 3d print the shell of their sticks for the Gladiator (?). But they do such a good job that I genuinely can’t be certain. Whereas the vast majority of ploopy builds… aren’t that.
It feels good. I’m thinking of smoothing it with epoxy but it’s not necessary.
Only as good as your 3d printer and settings I’d say
its 3d printed so it has layer lines. it can be improved or processed to be smoother though.