Hello! I have WG server with this config:

[Interface]
Address = 10.0.1.1/24
ListenPort = 51821
PrivateKey = [REDACTED]

[Peer]
PublicKey = [REDACTED]
PresharedKey = [REDACTED]
AllowedIPs = 10.0.1.2/32

When I try to ping I am getting this errors:

PING 10.0.1.2 (10.0.1.2) 56(84) bytes of data.
From 10.0.1.1 icmp_seq=1 Destination Host Unreachable
ping: sendmsg: Destination address required
From 10.0.1.1 icmp_seq=2 Destination Host Unreachable
ping: sendmsg: Destination address required
From 10.0.1.1 icmp_seq=3 Destination Host Unreachable
ping: sendmsg: Destination address required

How to fix it? This is nopt server connection issue otherwise I just wouldn’t receive ping responses.

  • Max-P@lemmy.max-p.me
    3·
    9 hours ago

    Your peer have no endpoint configured so the client needs to connect to the server first for it to know where the client is. Try from the client, and it’ll work for a bit both ways.

    You’ll want the persistent keepalive option on the client side to keep the tunnel alive.

      • Max-P@lemmy.max-p.me
        4·
        8 hours ago

        Yeah, and you’re pinging from server to client with no client connected. Ping from the client first to open the connection, or set keep alives on the client.

  • eldavi@lemmy.ml
    1·
    10 hours ago

    are you able to get something akin to route -n and ip a or ifconfig like printouts/information that you can copy/paste here to to ascertain your networks’ configuration to help us understand your environment and have a better chance of reaching a resolution.

    i thinking basic routing information like your gateway or your mask might be a decent place to start and i would normally use commands like those in a linux system as a starting point; i’m sure whatever platform you’re using has an analogs.

    at first glance it looks like a subnetting issue; but i’m sure i’m interpreting the information you’ve shared incorrectly and this basic routing information will help clarify that.

    • user_naa@lemmy.worldOPEnglish
      2·
      9 hours ago
      $ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet [REDACTED]/32 scope global lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether [REDACTED] brd ff:ff:ff:ff:ff:ff
    inet [REDACTED]/30 brd [REDACTED] scope global dynamic enp6s0
       valid_lft 327sec preferred_lft 327sec
    inet6 fe80::8e0:afff:feae:17cf/64 scope link 
       valid_lft forever preferred_lft forever
3: wlp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether [REDACTED] brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.1/24 brd 192.168.0.255 scope global wlp5s0
       valid_lft forever preferred_lft forever
    inet6 fe80::1291:d1ff:fe5a:2af8/64 scope link 
       valid_lft forever preferred_lft forever
4: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:cf:c8:59 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.1/24 brd 192.168.2.255 scope global virbr1
       valid_lft forever preferred_lft forever
5: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 52:54:00:bb:da:14 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global virbr0
       valid_lft forever preferred_lft forever
6: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:ec:b8:55 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:feec:b855/64 scope link 
       valid_lft forever preferred_lft forever
7: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none 
    inet 10.0.1.1/24 scope global wg0
       valid_lft forever preferred_lft forever

      # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         [REDACTED]    0.0.0.0         UG    0      0        0 enp6s0
10.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 wg0
[REDACTED]    0.0.0.0         255.255.255.252 U     0      0        0 enp6s0
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 wlp5s0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 virbr0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 virbr1

      # iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
# iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         
MASQUERADE  all  --  anywhere             anywhere
      • eldavi@lemmy.ml
        2·
        7 hours ago

        i think that eliminates the subnetting netting theory.

        let’s switch to some basic troubleshooting on the network: are you able to get use dhcp on this network to get a lease and; if so; can you do it with dhclient with some verbosity? are there any other hosts on the network that respond to ping? is ping allowed on this network?