Got a used HP Probook laptop. Just needs a new drive. HP specs say it has an m.2 2280 slot. So that’s what I ordered. Guess I needed to look closer.
edit: Thanks for all the info, guys. Different types of keys are explained here. Gonna have to look for a sketchy no-name brand.
…do what now?
No diss. I read that slot comment above you and went, “yep, yep, yep, makes sense. Man our standards are often dumb.”
Laughed with joy at your comment, because I totally get how foreign this shit is to so many people. It’s like if I walked up to a building engineer asking how they know that iron beam is safe for another 50 years via their skills and I’d just be like “…do what now?”
Back in the 80s & 90s you had to configure settings like IRQ and bad sectors.
And jumpers and terminators and make sure your SCSI IDs don’t conflict!
SATA is the interface that was mostly used until a few years ago, most people are used to seeing the version using cables (with an L shaped connector at both ends, still seen on 2.5" and 3.5" hard drives) but at some point they started making SATA drives using the m.2 form factor (with a connection similar to the one pictured in the OP) but the m.2 form factor is also used by other interfaces and not all of them are physically the same (the “expansion card” looks similar, the connection can be different), m.2 NVME drives are the ones mostly seen for storage space these days so most people assume that if storage is the m.2 type of will be NVME but sometimes (especially for laptops) it will be SATA that’s required instead (like in OP’s case)
Picture of an m.2 storage drive can be seen here and there’s a keying section that shows the difference between B and M keys: https://en.m.wikipedia.org/wiki/M.2
I still think of SATA as that new technology nobody has yet. I’m still used to IDE.
Don’t forget to put the drive in slave mode if it’s not at the terminal point of the cable.
Umm-mmm, you said what’s now a bad word because - Robert Plant is a liar - words never have two meanings.
They said the b SATA m2 SSD key NVMe AFR actuator clusters the cache in m.2 U.2 mSATA PCIe made a SATA lata gata when she said 2.5" wasn’t big enough but 3.5" was too much and LBA LP MTTR spindles the motor with 28 pins when it lost a pin while bowling for transfer rate cause you failed to defragment your USB-connected PCIe Gen 4 pokemon with AHCI finding IOPs over 9000 so the HDD Teraflopped into the EDSFF pool and RAMmed itself 6 feet under.
/s?
He gets it!
SATA= Slow (Max 6 Gbps) PCIe = Fast (Max > 100 Gbps in theory)
This is the maximum rate from the drive to the motherboard. Many drives are fast enough that SATA works become the bottleneck. With PCIe, the drive can run at its full speed, whatever that may be.