I am imaging this drive just in case it dies (from a 2000 gateway laptop I’m setting up for old games). it’s a 2.5" IDE Toshiba drive. It works just fine, has Win 2k on it. I have tried 2 different IDE to usb adapters, and both have powered up the drive, but neither have shown anything in fdisk (on linux). No weird noises or bad clicking from the drive.

I do notice that the drive does not have any jumpers on it - so I didn’t think I’d need to put a jumper on master (if it has that, i need to look closer) but I figured it would already have the jumper on master if it was the only drive in the laptop right?

  • Chronographs@lemmy.zip
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 days ago

    Maybe try and boot something like clonezilla to the laptop you took it from instead of messing with shoddy adapters?

          • Shadow@lemmy.ca
            link
            fedilink
            arrow-up
            5
            ·
            edit-2
            2 days ago

            Boot a clonezilla or Linux CD, don’t use your windows install. It should have proper USB support as long as you actually have USB ports.

          • Chronographs@lemmy.zip
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            2 days ago

            Could also try just a flash drive, I imagine whatever drive in there is pretty small. What ide adapters do you have anyways

          • Shdwdrgn@mander.xyz
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            1
            ·
            2 days ago

            OK something that old surely has a serial port on it? If so, look in to “sneakernet” (it’s a technique, not a product) to connect to another computer. I’ve even done networking over a serial port with linux, but there also used to be software just for copying files. That wouldn’t give you a drive image but it would at least back up the software.

            • cmnybo@discuss.tchncs.de
              link
              fedilink
              English
              arrow-up
              3
              ·
              2 days ago

              That hard drive is probably multiple gigabytes, it would take days to weeks to transfer that over a serial port. If the computer has a PC card slot, I would look for an ethernet adapter that would work with it.

              • Shdwdrgn@mander.xyz
                link
                fedilink
                English
                arrow-up
                2
                ·
                2 days ago

                Heh I managed to jump directly from best-case to worst-case, but hey, that still leaves everything in between as options. :-)

                Yeah, speed is everything and there are pcmcia ethernet cards for $10 or less on ebay if OP has that option.

                • bridgeenjoyer@sh.itjust.worksOP
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  1 day ago

                  It does have pcm slot and it does work. Ethernet may be my best option.

                  The other issue is the cd drive spins up but does not seem to be able to be reading either.