3V at 100 microwatts significantly limits its usefulness.
They say they’re planning to make a 1W version, which I assume will be either be much larger or have a much shorter lifespan. How does it work? Does it have a way to stop the reaction or does the 1W battery generate 1W of heat when there’s no load attached?
Some microprocessors in deep sleep mode can consume less than 100 microwatts, so I guess it could be possible with this version, but you’d need to charge for a long time. The power consumption of an active ESP32 can reach 700,000 microwatts.
I agree that’s low. claim of 3300mWh per gram, also has decay over 50 years. 100 microwatts over 24 hours is 2.4mWh. 600 microW solar for 4 hours is the same. 1 cm2 solar is 25mW, and so more daily power with just 6 minutes of sun per day.
3V at 100 microwatts significantly limits its usefulness.
They say they’re planning to make a 1W version, which I assume will be either be much larger or have a much shorter lifespan. How does it work? Does it have a way to stop the reaction or does the 1W battery generate 1W of heat when there’s no load attached?
I think for embedded iot type apps it could be great, pair it with some caps for peak loads (read/transmit).
Some microprocessors in deep sleep mode can consume less than 100 microwatts, so I guess it could be possible with this version, but you’d need to charge for a long time. The power consumption of an active ESP32 can reach 700,000 microwatts.
I have some environment monitoring units that run on cr32 that last around 12 months (not ESP’s ;) )
I agree that’s low. claim of 3300mWh per gram, also has decay over 50 years. 100 microwatts over 24 hours is 2.4mWh. 600 microW solar for 4 hours is the same. 1 cm2 solar is 25mW, and so more daily power with just 6 minutes of sun per day.