I have got a question for all the #tech people out there with experience regarding #hp and #Linux
#Windows11 is being rolled out and I probably will have to set up my Laptop again. Never used #Linux on a PC, so how about:
Do #Linux distributions support HP omen 17 (2019) ?
If so, which one would you recommend for chiefly MS Office use (64-bit Excel a must) ?
How difficult is a set-up for a non-IT pro who has always worked with Windows (but installed systems)?
@amunizp
I am going for the most recommended https://etcher.balena.io
ETCHER FOR LINUX X64 (64-BIT) (APPIMAGE)
LINUX
X64
@Linux4Everyone @linux
@amunizp
ok, at stick of at least 12 GB is required. Had to switch.
Also, OMENs are not certified for #Ubuntu, will try anyway:
https://activism.openworlds.info/@barb/110511082893469616
@Linux4Everyone @linux
@HistoPol
Not sure what Omens and the news article have to do?
@Linux4Everyone @linux
@amunizp
Once you realize, that you need to select the #Etcher version for the host system, not the target #OS you want to install, it is all great. - Already at 20% of #Ubuntu on the #USB stick.
@Linux4Everyone @linux
@amunizp
Ok. The installation on the stick is completed.
I put the stick in the target system (HP) and did not mess with any further settings, but pressed Try Ubuntu (first option).
Then, I selected the colorful (:)) option “Try Ubuntu” (without installation)
@Linux4Everyone @linux
@amunizp
The system did start and looks sort of like a windows 1.0 desktop, but in white on bright yellow, almost unreadable.
Thoughts?
@Linux4Everyone @linux
@HistoPol
That is strange #Ubuntu is normally purple or orange. And defo should not look like windows 1.0 . icons run on the left side and a very thin info bar on top
Could it be some sort of BIOS/UEFI config? Screen?
@Linux4Everyone @linux
@ubuntu
@amunizp
Was able to power down the system using the #ApplicationLauncherSearch, but the color settings need to be fixed.
https://vitux.com/3-ways-to-shut-down-power-off-your-ubuntu-system/
Does this have to be done via BIOS settings before booting? Once the system starts, I can hardly see a thing, got lucky with the launcher.
@Linux4Everyone @linux
@amunizp @Linux4Everyone @linux
Too bad, as I was thinking, #BIOS errors with the #Ubuntu #Linux #bootstick.
Any 💡 ideas which settings would need to be changed?
@HistoPol
https://www.infofuge.com/hp-omen-17-ubuntu/
Not an HP owner or user. So Googled, and it seems the process is straightforward.
#linuxmint builds on #ubuntu, and is a leading install and forget distribution which is also a good starting point for newcomers.
That said, not clear on how you got the BIOS errors. Could you walkthrough to it please?
@amunizp @Linux4Everyone @linux
@vipaal
Not sure if I understood everything. I created the USB bootstick with the latest 5yr “warranty” versión.
Then, I reebooted and selected the 1st option: start or install.
I then selected boot from USB.
Then I got the BIOS Error screen for some second.
After that, the yellow screen from the UEL below, but with white instead of green.
Note: I’ve never seen a working #Linux desktop.
@amunizp @Linux4Everyone @linux
@HistoPol
This colour thing is interesting.
Is this the thing? https://askubuntu.com/questions/1404516/screen-turns-yellow-even-using-the-live-option-ubuntu-22-04
@ubuntu
@Linux4Everyone @linux
@HistoPol
Because you are only testing maybe use an older distribution for #Ubuntu LTS?
OR
Sudo warning: https://heimdalsecurity.com/blog/watch-out-you-might-get-hacked-when-copy-pasting-commands-from-webpages/
The answer says to enable Wayland. But does not say where to put those commands: Ctrl+Alt+T will open a terminal (command prompt-ish). The first line will open a hacker-like text editor. Do the edit and a menu in the bottom tells you how to save and close. “^” is ctrl key. Nano (the text editor) is made for computers without mice.
@ubuntu @Linux4Everyone @linux
@amunizp
Yes, exactly, but with no green but white instead (even worse contrast).
I read the link now:
"
I managed to solve the problem, I had to set the monitor calibration in Settings/Color and set sRGB as default for both monitors."
Will not work for me as I cannot see a think w/ white on yellow. The power-down button was puré luck.
Also, this us a laptop monitor, no #display buttons, etc.
IMO sth. would…
@ubuntu @Linux4Everyone @linux
@amunizp @ubuntu @Linux4Everyone @linux
…need to be reset in the BIOS, though what, no idea whatsoever.