OK, thanks for the feedback. Perhaps I am doing something terrible wrong with it.

I will recheck the system again.

Thanks

Would you mind to elaborate a bit more about your experience witht he sophos?

I got a reused xgs115 a few months ago and I found the experience not so pleasant. The device lags a lot with the web page interface, the learning curve is steep in my opinion and I have problems to setup some services in a reliable way (they tends to hangs up, but this is perhaps my own problem)

Do you know by chance if they are able to have the Ds-lite tunnel for an ipv6 to ipv4 working?

How the average quality from those IKEA plugs?

In my experience Ikea quality in electronics range from ok to a big ball of crap without any apparent way to distinguish in which side they are.

Thank for the suggestions, I will take a look because it is true that I focused myself on the link manager but perhaps a link sync tool could do the job.

Thanks again

I didn’t know floccus, I will take a look.

Thanks for the suggestion

Thanks for the suggestion, but as far as I know there is not any plugin for the browser available, right?

Take a look onto he following image: https://i0.wp.com/www.techjunkie.com/wp-content/uploads/2016/09/tv-size-distance-chart.png?ssl=1

There is always a subjective component in this kind of discussions but this image will help you to see if yiur setup will make sense based in the real perception of the human eye.

The learning curve is a bit steep but his guide is awesome https://trash-guides.info/Radarr/Tips/How-to-setup-language-custom-formats/

In the other hand, the public trackers are dominated by English and, at least I, I couldn’t find a lot of Spanish dual movies better than the 720p

In any case, if you can gain access for a Spanish private tracker with radarr support, let me know

Thx, I will keep in mind, but I have consumer grade hw and I am afraid that vlan in my switch is not possible.

I any case thanks for the bunch of tips

The you recommend to mount them via the hypervisor?

I was certainly planning to use it in the vm itself…

Thanks for the comment, I will try to check but performance should not be an issue. In the end it is personal selfhosted service.

If you think something similar to Instagram could solve your problem, check this: https://docs.pixelfed.org/running-pixelfed/installation/

Also, it should be trivial to expand it to the rest of the family

Super good, it is increíble useful and the ability to find any document in almost any place in seconds in awesome.

Once this is said, you need to stick to a process and it is time consuming, and of course, you need to manually review the automatics tagging feature.

So, It is not a set and forget like most of the people expect

Best answer to your question, try to stick to it

Definitely.

I forgot to add that it would be necessary not to overdimension the set up. Any extra power is something that needs to be powered.

But with the chosen cpu and GPU there is not a lot of room here.

Some tips here:

• get a platinum rated power supply, if you can afford it go for a titanium. The efficiency in the power supply is half of the efficiency of the rig
• reduce the number of the modules to the minimum
• get a platinum rated power supply ;)
• get big passive coolers, you want to idle the fans
• reduce the number of usb and connectors to the minimum. Their converters are not the most efficient. Try not to connect enything on them.
• NO mechanical parts (including fans or water coolers)
• set schedulers to conservative or power efficient. You don’t want to spike the power just because a task is 2ms longer than expected.
• pick a power efficient CPU/gpu (I think we can discard this one based in your choices)
• use the latest amd adaptative undervoltage technology to ensure to reduce the wattage of the cores
• try to reduce to the bareminimum the number of background tasks /services running.

And that’s all. Sometimes there is a component of trial and error because sometimes the curve performance / power is not entirely linear and you don’t want to hit exponential-non-linear zone.

Good luck and if you can post you build with numbers and some lessons learnt would be great

Good luck

Hi,

Every time it happened to me was either transcoding, either a real poor network speed.

I would double check the transcoding option

Oooops, that was not certainly the intention.

Clearly I need to work in my communication skills. My apologies if I really upset you

From your text I understand you are not a really tech savvy person and yiu are really struggling with all the service and configuration involved.

If you want a simple tip, stick to tailscale, it is a vpn and will protect all your services because you will not have access from internet. It is pretty safe and the configuration is trivial.

The obvious drawback is that you won’t have internet access without installing the vpn, which depending the use case can be a deal breaker.

Honestly, a proper configured nginx with certificates and strong password are reasonable secure when there is not any misconfiguration. But if you are in doubt stick to tailscale.

Good luck :)

Yes you do,

Configuration control is a max in this world and you don’t have the control/ability/power to decide which patches go in or stay out. The vendor, the person who has all the power and knowledge, is the one who decides.

You can loose all your certifications or being held liable for any problem due to that policy.

Not even red hat (certainly not a life critical system) allows a different level of patches/state out of their approved ones