I’m on at least 2 blocklists at this point for the crime of not having reverse DNS set up. I don’t know how rDNS works. No amount of reading Wikipedia is helping me understand what I have to do.

  • I have a domain at a registrar which gives me bog standard DNS.
  • I have Apache running on my network.
  • I have PiHole running on my network.

My understanding is that rDNS is not set up at my registrar, but somewhere in my network. What do I do?

Thank you for your time.

  • Shadow@lemmy.ca
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Do you have a different firewall/router you can try? Even just plug your PC directly into the modem for now to bypass your router and rule that out.

    • drkt@feddit.dkOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      Routing to me has been solved, my router was incorrectly dropping pings on WAN because I messed up the firewall configs. The trouble users still can’t reach my website.

      • Shadow@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Your ISP may block 80 / 443. Try moving your webserver to an alternate high port and ask the users to test with that.

        • drkt@feddit.dkOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          But it’s only very few people. If my ISP blocks these ports, why 99% of people have no issues?

          • Shadow@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            At this point I’d install wireshark and see if I’m getting their TCP connections at all.

            Given your other routing issues though, I would guess you have another config issue on your firewall.

            • drkt@feddit.dkOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              edit-2
              1 year ago
                5.186.33.87 > 89.150.135.135: ICMP echo request, id 1, seq 43476, length 40
              12:38:19.843890 d0:50:99:81:48:17 > 4c:6d:58:4a:97:d4, ethertype IPv4 (0x0800), length 74: (tos 0x0, ttl 64, id 21715, offset 0, flags [none], proto ICMP (1), length 60, bad cksum 0 (->1dc0)!)
                  89.150.135.135 > 5.186.33.87: ICMP echo reply, id 1, seq 43476, length 40
              12:38:20.219177 d0:50:99:81:48:17 > 4c:6d:58:4a:97:d4, ethertype IPv4 (0x0800), length 43: (tos 0x0, ttl 64, id 32958, offset 0, flags [none], proto ICMP (1), length 29, bad cksum 0 (->3f6d)!)
              

              Packet capture from the router for 4 pings from him to me. 2 of 8 packets expected were captured and have bad checksums. Disregard, all 8 expected packets do show up